Snoos combined Smoke Detector and Siren V2Side
Snoos combined Smoke Detector and Siren V2Side
Snoos combined Smoke Detector and Siren V2Side
Snoos combined Heat Fire Detector with Siren V2

Water Flooding Detector V2


Product Info

Wireless water detector connected to your mobile device, that also works as a siren in case of intrusion. Links together with other similar sensors and connects to Snoos Home Alarm.

Description

Snoos V2 - Wireless Water Detector with mobile access

The water detektor is one out of a familiy with total 3 detector types, that connects to each other and to Snoos Home Alarm and your Smartphone.

  1. Smoke Detektor
  2. Heat Detektor
  3. Water Detector

The water detector is useful in rooms where leaking pipes or flooding can occur e.g in a kitchen, behind the dish washer or in the basement. The sensor triggers if there is water on the floor. Like the Smoke and Heat detectors, it works with the alarm system. If water is detected, the alarm system will react. The flooding detector works by break-in. Its 85db siren will start if the burglar alarm is set off. 

It uses 2-way wireless radio to communicate with the alarm system and will join in a group with Smoke and Heat detectors. Thus, if you have several Snoos V2 detectors in your home, they will send to each other. E g. if water is detected in a room, this sensor will send to not only the alarm system, but also to other sensors in the group. The alarm system will pass the message to you mobile device or notify by one of the other methods you have set up in your app.

Group hookup

All flooding detectors are linked with Smoke detectors, Heat detectors and the alarmsystem with your App. They thereby act as one strong defence group, against Fire, Smoke and Flooding. 

Siren activate by burglary

Since the Flooding detector uses 2 way radio communication. It will start the siren in case of burglary.

Made in Denmark

This Flooding Detector is developed in Denmark and meets applicable European standards.
It's sister-sensor, the smoke detector, won the Reddot price in 2016 for best design.

Installation

 Installation

The flooding detector with siren must be placed indoors.
The best location is on the floor, as close as possible to the possible water source. Do not place the sensor unde pipes where it will be exposed to dripping water or rain.
There should not be more than 10m between the smoke detectors.

Functions

 Functions

Battery conservation function; delayed start/stop:

To increase battery life for up to 5 years, the alarm siren only checks for start and stop signals every 20 seconds. Normally, this means that it is an average of 10 seconds from the alarm is triggered until the V2 mini siren starts. Similarly, it takes an average of 10 seconds from a triggered alarm is deactivated until the siren stops. 

Spec

 Specifications

 - Battery: 1 pc. 3V Lithium CR123A (included)
 - Battery life: 5 years
 - Transmission range: 20 m
 - Measurements: Ø65 mm x 45 mm
 - Mounting: Positioned on a horizontal surface
 - Siren Volume: 85 dB minimum
- Communication Wireless Radio, 868 mHz

 

Questions

Write an email to our customer service at This email address is being protected from spambots. You need JavaScript enabled to view it. if you have questions regarding the flooding detector with siren.

Units in box: 1
© 2018 SNOOS A/S | Denmark | +45 8770 8001. All Rights Reserved. Powered by JoomService